FM10-PRO
CO₂, temperature & humidity monitor
Understand indoor conditions with a local color display and optional building-system connectivity.
View product →COMMERCIAL · ENVIRONMENT
Indoor air-quality monitoring
Make indoor conditions visible, with an integration path for a separately designed ventilation system.
SYSTEM OVERVIEW
How the system connects
01
Room air measurements
02
IAQ monitor
03
Display / network output
04
Optional BMS integration
Sensors measure the parameters included in the selected model and display local conditions. An optional protocol or output can pass information to a building controller. Ventilation logic, commissioning and actuator selection are separate engineering tasks.
SYSTEM COMPONENTS
What goes into the solution
- Choose CO₂ / temperature / humidity or a multi-sensor configuration.
- Optional: matched communication module or confirmed relay/0–10 V output.
- Ventilation equipment and BMS are not included with the monitor.
SPECIFICATION CHECKLIST
Define before you select
- Required measured parameters and sensor accuracy
- Installation location and calibration plan
- Network point list and intended control sequence
COMPATIBLE CONFIGURATIONS
Explore the product families
Products below are alternatives or complementary components, not a pre-validated kit. Choose the exact electrical and communication variants for the project.
FM60
FM60 Indoor Air Quality Monitor
FM60 monitoring: PM2.5 / humidity / temperature / CO2 / TVOC / air pressure.
View product →